- X AXIS 30″
- Y AXIS 16″
- Z AXIS 20″
- SPINDLE NOSE TO TABLE (~ MAX) 24″
- SPINDLE NOSE TO TABLE (~ MIN) 4″
- LENGTH 36″
- WIDTH 14″
- T-SLOT WIDTH 5/8″
- T-SLOT CENTER DISTANCE 4.92″
- NUMBER OF STD T-SLOTS 3
- MAX WEIGHT ON TABLE 3000 LB
- MAX THRUST X 2550 LB
- MAX THRUST Y 2550 LB
- MAX THRUST Z 4200 LB
- TYPE CAROUSEL (SMTC OPTIONAL)
- MAX TOOL DIAMETER (FULL) 3.5″
- MAX TOOL WEIGHT 12 LB
Machine Milling in Mount Carmel, PA
Haas VF-2
Haas VF-4
- X AXIS 50″
- Y AXIS 20″
- Z AXIS 25″
- SPINDLE NOSE TO TABLE (~ MAX) 29″
- SPINDLE NOSE TO TABLE (~ MIN) 4″
- LENGTH 52″
- WIDTH 18″
- T-SLOT WIDTH 5/8″
- T-SLOT CENTER DISTANCE 3.15″
- NUMBER OF STD T-SLOTS 5
- MAX WEIGHT ON TABLE 3500LB
- MAX THRUST X 2550 LB
- MAX THRUST Y 2550 LB
- MAX THRUST Z 4200 LB
- TYPE CAROUSEL (SMTC OPTIONAL)
- MAX TOOL DIAMETER (FULL) 3.5″
- MAX TOOL WEIGHT 12 LB
Haas TM1
- X AXIS 30″
- Y AXIS 12″
- Z AXIS 16″
- SPINDLE NOSE TO TABLE (~ MAX) 20″
- SPINDLE NOSE TO TABLE (~ MIN) 4″
- LENGTH 47.75″
- WIDTH 10.5″
- T-SLOT WIDTH 5/8″
- T-SLOT CENTER DISTANCE 4.00″
- NUMBER OF STD T-SLOTS 3
- MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 1000 LB
- MAX RATING 7.5 HP
- MAX SPEED 4000 RPM
- MAX TORQUE 33 FT-LB @ 1200 RPM
- DRIVE SYSTEM DIRECT SPEED BELT DRIVE
- TAPER CT OR BT 40
Cincinnati Arrow 500
- X-AXIS 20″
- Z-AXIS 20″
- TABLE SIZE 27.5″ X 20.5″
- SPINDLE SPEED 8000 RPM
- SPINDLE TAPER CAT 40
- SPINDLE NOSE TO TABLE TOP 5″ – 25.1″
- SPINDLE MOTOR 12.5 / 7.5 HP AC
- TABLE LOAD CAPACITY 1103 LBS.
- RAPID TRAVERSE RATES 1180 IPM
- TOOL CHANGE TIME 6 SECONDS
- MAX TOOL LENGTH 15″
- MAX TOOL WEIGHT 15 LBS.
- MACHINE DIMENSIONS (L X W X H) 87″ X 83″ X 107″
- MACHINE WEIGHT 6725 LBS
Fryer VB 60 Toolroom Mill
- CAPACITY: 30x30x60″
Chevalier FM32KP Knee Mill
- CAPACITY: 10×54″
